Hunter HY-151-D 1-1/2″ Y Filter for Drip and Micro Irrigation
The Hunter HY-151-D is a Y-pattern filter that keeps debris out of drip emitters and micro sprays. It uses a 120-mesh (125 micron) disc and a flush cap for routine cleaning. Genuine, brand-new Hunter product.
Key Specifications & Features
- SKU: HY-151-D
- Brand: Hunter
- Inlet / outlet: 1½” male pipe thread
- Filtration: 120-mesh (125 micron) disc
- Flow: up to 60 GPM
- Maximum working pressure: 120 PSI
- Operating temperature: up to 120°F
- Body: glass-filled polypropylene
- UPC: 611698534755
Where It Installs
Put the HY-151-D on the inlet side of a drip or micro zone, ahead of the emitters. Match the 1-1/2″ threads to the lateral. Stay inside up to 60 GPM so the screen or disc does not see more water than it is rated for. The cap comes off for flushing without cutting the filter out of the line.
Frequently Asked Questions
What is the Hunter HY-151-D?
It is a 1-1/2″ Y-filter with a 120-mesh disc, rated up to 60 GPM.
What mesh is the HY-151-D?
The element is a 120-mesh (125 micron) disc.
What pressure can the HY-151-D take?
Maximum working pressure is 120 PSI. Operating temperature is up to 120°F.
Does the HY-151-D include a pressure regulator?
No. The HY-151-D is the filter only. Hunter HFR models combine a filter and a 25 or 40 PSI regulator in one assembly.
How is warranty handled?
Warranty terms are set by Hunter. See Hunter’s published warranty for micro-irrigation filters.
