ACE DOWN wall fixture produces a focused beam of light and can be mounted on a wall or fence. The light source lies deep within the fixture to ensure the light is not blinding.
The width of the light provided by the ACE DOWN can be adjusted using the separately available SHUTTER 1.
This pack is 6 ACE UP-DOWN 100-230V Corten fixtures. Each one is $327.72, $9.02 less than the $336.74 single, so the pack saves $54.12. The pack ships in 3-5 days.
Specifications
- Application: Canopy, Facade, Fence/wall , House
- CRI: 92
- IP class: 55
- Light direction: Down and up
- Types of Light: Direct
- Processing: Concrete, Wood
- Installation advice: Due to the already mounted light source, the fixture is immediately ready for use. Thus, you do not need to install the light source first. However, during installation, keep in mind that all components are accessible for replacement.<br /> <br /> Remove the Torx screw with the supplied Torx wrench. Remove the cover from the fixture. Provide a hole of at least Ø 13 mm in the wall for the passage of the cable. Do this at the place where later the top half of the armature will sit over it. Fix the mounting plate of the fixture to the wall with the corresponding screws. Mount the hood of the fixture to the mounting plate again. Tighten the Torx screw. Connect the EASY-LOCK connector to the main cable.<br /> <br /> We recommend cleaning the fixture at least once a year with a clean cloth and warm water.
- Lead time: Ships in 3-5 days
