Superior VBDW10 1" Dirty Water Brass In-Line Valve
The Superior VBDW10 is the 1 in. VBDW dirty-water
brass in-line valve. Reverse-flow design keeps the valve closed if the
diaphragm tears. It ships with the standard 20/30 VAC solenoid used on
the VBDW series.
Key Specifications & Features
- SKU: VBDW10
- Brand: Superior
- Series: VBDW dirty-water brass
- Size: 1 in.
- Flow design: Reverse flow, normally closed
- Body: Red brass
- Solenoid: Standard 20/30 VAC (24 VAC). The replacement assembly for this series is VDWASKIT
- Pressure: 10 to 200 PSI
- Closing speed: 0.9 to 2.0 seconds at 50 to 100 PSI
- 1 in. pressure-loss chart: 5 GPM at 0.4 PSI, 20 GPM at 3.4 PSI, 40 GPM at 12.9 PSI, 50 GPM at 20.5 PSI
- Dimensions: height 4 3/4 in., width 4 1/4 in., length 2 1/2 in.
- Diaphragm: 600 lb. test nylon-reinforced EPDM
- 1 in. service parts: diaphragm kit VDW0710DKIT, bonnet kit VPRDW0710BKIT, solenoid kit VDWASKIT
Frequently Asked Questions
What size is the Superior VBDW10?
1 in. VBDW07 is 3/4 in., VBDW10 is 1 in., VBDW12 is 1 1/4 in., VBDW15 is
1 1/2 in., and VBDW20 is 2 in.
What voltage does VBDW10 use?
The VBDW series comes with a standard 20/30 VAC solenoid, the usual 24 VAC
irrigation coil. It is not a 110 VAC valve. 975100 is the 110 VAC 1 in. valve.
Which solenoid replaces the one on a VBDW10?
VDWASKIT is the complete 24 VAC solenoid assembly for every VBDW size,
including VBDW10. 16075 is the 3100 master-valve solenoid and does not fit
this valve.
Why is the VBDW a reverse-flow valve?
Superior’s reverse-flow design stays closed if the diaphragm tears or
is punctured. Non-continuous flow through the solenoid and valve orifices
is what Superior specifies for dirty-water service.
